74
Flowing through a stiff duct, flanged to the head,
the secondary air reaches the exhaust duct thus
providing oxygen addition to the unburnt gases
just before they enter the catalytic converter. The
efficiency of he catalyzing process is therefore
increased.
7.14.3
Removing the SAS
Warning
– This operation must be performed
with the engine cold.
Remove the silencer.
Remove the R.H. fairing.
Loosen the clamps and remove the cooling fluid
inlet and outlet sleeves from the pump cover and
drain the cooling system.
Remove the top strip fixing the SAS valve
connection sleeve to the drainage as shown in the
figure.
Remove the 2 fixing screws, the gasket and the
pipe connecting the SAS valve to the head. Then,
remove the pipe.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...