VESPA GT 200, Workshop Manual

Page: 264 / 287

264
13 Pre-Delivery Inspections
Before deliverying the vehicle, carry out the following checks:
Caution – Handle gasoline with the utmost care.
13.1 Checking the Vehicle Appearance
Paintwork
Plastic fairing joins
Scratches or dents
Dirtiness
13.2 Checking the Tightening Torques
Check all tightening torques
Check external fairing screws
13.3 Checking the Electrical Circuit
Charge the battery with a suitable battery charger
Ignition switch
Lights: headlight (high/low beam), taillight, and warning lights on instrument panel
Brake light and brake light switches (front and rear)
Turn signal lights (front and rear), and warning lights on instrument panel
Instrument panel light, fuel and cooling liquid temperature indicators
Horn
Electric starter
Emergency engine cut-off switch
Electrical seat opening button
Warning – The battery must be charged before use to ensure optimal performance. An
inadequate electrolyte level will result in a premature failure of the battery.
Warning – When installing the battery on the vehicle connect the positive lead before the
negative lead.
Caution – Battery electrolyte contains sulphuric acid. Battery electrolyte is poisonous and
causes severe burns. Avoid contact with the eyes, skin, and clothes.
In case of contact with the eyes and/or skin, abundantly wash the affected area with clean
water for about 15 minutes and seek immediate medical attention.