122
10.7.10
Inspecting the Clutch Drum
-
Check that the clutch drum is not worn or
damaged.
-
Measure the internal diameter, as shown in the
figure.
Standard dimension:
Clutch drum
Ø 5.283 in
(
134.2 mm
)
Max. allowable dimension:
Clutch drum
Ø 5.295 in
(
134.5 mm
)
10.7.11
Checking the Clutch Drum Surface Eccentricity
-
Install the drum on a driven pulley shaft using
two bearings (internal diameter 15 and 17mm).
-
Use the original spacer nut to lock the
drum/shaft assembly.
-
Place the drum/shaft assembly on the support
(020074Y) to check the driving shaft alignment.
-
Using a feeler pin comparator and the magnetic
base, measure the drum eccentricity.
-
Repeat the measurement on three surfaces
(central, internal and external).
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...
