255
-
Remove both pillion pegs by loosening the two
screws (on each side) shown in the picture.
-
Loosen the two (LH and RH) footrest fixing
screws.
-
Remove the two (LH and RH) lower plastic
covers by loosening the screw as shown in the
picture.
-
Remove the screws positioned underneath the
rubber mat, as shown in the picture.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...