194
-
Remove the float bowl, the accelerator pump
and its gasket.
-
Remove the sealing gasket.
-
Remove the accelerator pump inlet and outlet
valves from the bowl.
Note:
Pay particular attention when handling the
valves, since they consist of nozzles, springs and
metallic spheres.
Note:
Do not remove the accelerator pump piston
and control.
-
Using a hammer, and with the carburetor
suitably supported, remove the float pin from
the throttle valve side.
-
Remove the float.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...