221
-
With the aid of a flat screwdriver, carefully
remove the static part of the ceramic seal from
the flywheel body.
-
Place the flywheel cover under the press.
Ensure that the cover is perfectly horizontal.
-
Using the drift in inverted position, eject the
two ball bearings.
10.12.3
Checking the Components
-
Check that the impeller is not cracked or worn.
-
Check that the impeller shaft is not oxidized.
-
Check that no oxidation is present on the ceramic seal and bearing housings.
-
Ensure that the drive is not cracked and that it is perfectly joined to the steel hub.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...