165
10.10.17 Inspecting the Wrist Pin Diameter
-
Measure the external diameter of the wrist pin.
Standard dimension:
Wrist pin diameter
∅
0.5904-0.5906 in
(
14.996-15.000 mm
)
Min. allowable diameter:
Wrist pin diameter
∅
0.5903 in
(
14.994 mm
)
-
Estimate the clearance between the wrist pin
and piston.
Standard clearance:
Piston/wrist pin
0.00003-0.00025 in
(
0.001-0.010 mm
)
Note:
The wrist pin housing has two lubrication
channels so, in order to get a true reading of the
internal diameter, the measurement must be taken
parallel to the axis of the piston.
10.10.18 Inspecting the Piston and Cylinder Diameters
-
Measure the outside diameter of the piston,
perpendicular to the wrist pin axis.
-
Take this measurement 0.197 in (
5 mm
) from
the base of the piston, as shown in the figure.
Standard diameter:
Piston diameter
∅
2.8328-2.8339 in
(
71.953-71.981 mm
)
Note:
The wrist pin housing has two lubrication
channels so, in order to get a true reading of the
internal diameter, the measurement must be taken
parallel to the axis of the piston.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...
