190
10.11.7
Fitting the Starter Motor
-
Fit a new O-ring on the starter motor and
lubricate it.
-
Fit the starter motor to the crankcase and
tighten the two screw fasteners to the specified
tightening torque.
Tightening torque:
Half crankcase coupling screws
8.1-9.6 lbs·ft
(
11-13 N·m
)
Note:
Re-fit the remaining engine components as
described in the previous pages.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...