161
-
Remove the Allen screw, shown in the figure,
and the counterweight.
-
Remove the timing chain sprocket and
associated washer from the camshaft.
-
Remove the timing chain drive sprocket from
the camshaft.
-
Remove the screw fastener indicated by the
arrow in the figure, the stator and the chain
guide.
Note:
Mark the chain in order to replace it with the
same direction of rotation. The chain tensioning
pad must be removed from the transmission side.
The chain guide can only be removed following the
removal of the cylinder head.
10.10.12 Removing the Camshaft and Rockers
-
Remove the two screw fasteners and the
camshaft retainer shown in the figure.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...