252
12.6
Removing the Glove-box Panel
-
Remove the rear handlebar cover.
-
Loosen the two screws shown in the picture,
from the front leg-shield.
-
Remove the expansion tank cover and its cap.
-
Loosen the screw shown in the picture,
positioned inside the glove-box compartment.
-
Loosen the two screws shown in the picture,
positioned underneath the two side covers.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...