VESPA GT 200, Workshop Manual

Page: 11 / 287

11
10.10.30 Checking the Valve Spring Plates and Half-cones 174
10.10.31 Fitting the Valves 174
10.10.32 Inspecting the Timing Components175
10.10.33 Inspecting the Camshaft 176
10.10.34 Fitting the Cylinder Head 177
10.10.35 Fitting the Timing Components 178
10.10.36 Fitting the Thermostat 181
10.10.37 Fitting the Intake Manifold 181
10.11 Crankshaft 182
10.11.1 Preparing the Engine for Crankcase Separation 182
10.11.2 Separating the Crankcase Halves 183
10.11.3 Checking the Crankshaft 184
10.11.4 Checking the Crankcase Halves 186
10.11.5 Checking the Main Bearings 187
10.11.6 Assembling the Crankcase Halves 188
10.11.7 Fitting the Starter Motor 190
10.11.8 Removing the Carburetor 191
10.11.8.1 Kehin CVK 30 Carburetor 191
10.11.8.2 Walbro WVF-7P Carburetor 197
10.11.9 Re-assembling the carburetor 204
10.11.9.1 Kehin CVK 30 Carburetor 204
10.11.9.2 Walbro WFV-7P Carburetor 206
10.11.10 Checking the Float Height 208
10.11.10.1 Kehin CVK 30 Carburetor 208
10.11.10.2 Walbro WVF-7P Carburetor 210
10.11.11 Checking the Vacuum Valve and the Needle 212
10.11.11.1 Kehin CVK 30 Carburetor 212
10.11.11.2 Walbro WVF-7P Carburetor 214
10.11.12 Checking the Automatic Choke Device 215
10.11.12.1 Kehin CVK 30 Carburetor 215