146
10.8.9
Fitting the Flywheel
-
Fit the flywheel taking care to correctly insert
the woodruff key.
-
Tighten the flywheel lock-nut with the prescribed
torque.
Tightening torques:
Flywheel fixing nut
38.2-42.6 lbs·ft
(
52-58 N·m
)
-
Check that the pick-up clearance gap ranges
between 0.013-0.029 in (
0.34-0.76mm
).
-
No adjustment of the clearance gap is necessary
when fitting the pick-up.
-
Different values are the result of deformations of
the pick-up support.
Note:
A variation of the clearance gap changes the
minimum supply speed if the ignition system.
10.8.10
Fitting the Flywheel Cover Assembly
-
Position the flywheel so that the TDC reference
mark is aligned with the mark on the crankcase.
Summary of Contents for GT 200
Page 1: ......
Page 90: ...90 9 1 2 Turn Signal Lights Horn Services and Accessory Pre Wiring ...
Page 151: ...151 10 10 Lubrication Circuit ...
