2000 MS Hardware Maintenance
48
Chemical Ionization Options
13. Use two #6 x 0.50 inch long screws to attach the multiple CI manifold to the
register plate and side panel.
14. Stand the side panel next to the right side of the mass spec.
15. Guide the two tubes past the power board and through the opening in the
chassis halfway up the middle bulkhead, behind the front panel. Leave the tubes
protruding out the opening for the mass spec pneumatics.
16. Reattach the side panel with the #8 screws.
17. Loosen the four screws on top of the pneumatics block.
18. Remove the U-shaped tube from the pneumatics block.
19. Remove the single metal tube from the pneumatics block.
