Toyota Verso TNS510 User Manual Download

Page: 200 / 258

200

TNS 510

AUDIO SYSTEM
● Searching for a desired file

While the disc is playing, touch “SCAN”

briefly.

“SCAN” appears on the screen. The CD

player will play the next file in the folder for

10 seconds, then scan again. To select a

file, touch

“SCAN”

once again. If the CD

player reaches the end of the folder, it will

continue scanning from file 1.
After all the files are scanned in one pass,

normal play resumes.

● Searching for a desired folder

While the disc is playing, touch “SCAN”

and hold it until the “FLD.SCAN”

appears on the screen.

The program at the beginning of each

folder will be played for 10 seconds. To

continue listening to the program of your

choice, touch

“SCAN”

once again.

After all the folders are scanned in one

pass, normal play resumes.

6E5119G

01955_TNS 510_OM.indd 200

21/10/2008 16:18:53

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands