Toyota Verso TNS510 User Manual Download Page 233

Page: 233 / 258

TNS 510

233

AUDIO SYSTEM

● Selecting a desired music file

“

TRACK”

“TRACK

”

button/“►►”

or “◄◄”: These buttons are used for direct

access to a desired audio track. Push the

“

TRACK”

“TRACK

”

button or

touch “►►” or “◄◄” until the desired track

number appears on the screen. When

operation of the button or the screen is

complete, the player will start playing the

selected track from the beginning.

Fast forward:

Push and hold the

“

TRACK”

button or continue touching

“►►” to fast forward the player. When you

release the button, the player will resume

playing from that position.

Reverse:

Push and hold the

“TRACK

”

button or continue touching “◄◄” to

reverse the player. When you release the

button, the player will resume playing.

“TRACK LIST”:

When

“TRACK LIST”

is touched, the list of files in which the

music files currently being played back is

displayed.

The music file currently being played back

displays at the top.

Touch a music file to play back the selected

file.

01955_TNS 510_OM.indd 233

21/10/2008 16:19:09

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Brands by name

Popular brands