manualshive.com logo in svg

Toyota Verso TNS510, User Manual

Share
Download
Toyota Verso TNS510 User Manual Download Page 100

100

    TNS 510

ADVANCED FUNCTIONS

—  Deleting area to avoid

1.  Push the “MENU” button.

2.  Touch  “Navigation”  on  the  “Menu” 

screen.

3.  Touch “Memory” on the “Navigation” 

screen.

4.  Touch “Delete”.

5.  Touch the button to be deleted.
“Delete all”:

 To delete all registered areas 

to avoid in the system.

6.  To  delete  the  area,  touch  “Yes”.  To 

cancel the deletion, touch “No”.

—  Deleting previous points

The previous destination can be deleted.

1.  Push the “MENU” button.

2.  Touch  “Navigation”  on  the  “Menu” 

screen.

3.  Touch “Memory” on the “Navigation” 

screen.

4.  Touch “Delete previous points”.

5.  Touch the button to be deleted.
“Del. all”:

 To delete all previous points in 

the system.

6.  To delete the point, touch “Yes”. To 

cancel the deletion, touch “No”.

4E5045aG

4E5046G

4E5047aG

4E5048G

4E5049G

01955_TNS 510_OM.indd   100

21/10/2008   16:17:40

Summary of Contents for Verso TNS510



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands