Toyota Verso TNS510 User Manual Download

Page: 195 / 258

TNS 510

195

AUDIO SYSTEM

● Selecting a desired track

“

TRACK” or “TRACK

” button:

Use for a direct access to a desired track.

Push the

“

TRACK”

“TRACK

”

button until the desired track number

appears on the screen. As you release the

button, the CD player will start playing the

selected track from the beginning.

“TRACK LIST”:

The desired track can be

selected from a list.
Touch

“TRACK LIST”

. The track list is

displayed.

Touch the desired track number. The

CD player will start playing the selected

track from the beginning.



By touching this button, the list moves

up by 6 track groups. If this button is

touched when the top page of the list is

displayed, the last page is displayed.



By touching this button, the list moves

down by 6 track groups. If this button is

touched when the last page of the list is

displayed, the top page is displayed.

Fast forward:

Push the

“

TRACK”

button and hold it to fast forward the disc.

When you release the button, the CD player

will resume playing from that position.

Reverse:

Push the

“TRACK

”

button

and hold it to reverse the disc. When

you release the button, the CD player will

resume playing.

6E5118G

01955_TNS 510_OM.indd 195

21/10/2008 16:18:51

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands