Toyota Verso TNS510 User Manual Download Page 61

Page: 61 / 258

TNS 510

DESTINATION SEARCH

• To change the route before starting

guidance

ROAD PREFERENCE

1. You can change road preference by

touching “Road preference”.

2. Select the desired road preference by

touching the button.

When searching for a route, the system will

avoid routes when the indicator is off.

3. After choosing the desired road

preference, touch “OK”.

INFORMATION

• Even if the “Allow motorway”

indicator is dimmed, the route

cannot avoid including a motorway

in some cases.

• If the calculated route includes a

trip by ferry, the route guidance

shows a sea route. After you

travel by ferry, the current vehicle

position may be incorrect. Upon

reception of GPSsignals, it is

automatically corrected.

3 ROUTES SELECTION

1. To select the desired route from three

routes, touch “3 routes”.

2. Touch “Quick1”, “Quick2” or “Short”

to select the desired route.

“Quick1”:

Recommended route.

This route is indicated by an light blue

line.

“Quick2”:

Alternative route.

This route is indicated by a purple line.

“Short”:

A route by which you can reach

the destination in the shortest distance.

This route is indicated by a green line.

“Info.”:

To display the following information

about each of the 3 routes

2E5059G

2E5060G

2E5061G

2E5062G

01955_TNS 510_OM.indd 61

21/10/2008 16:17:07

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Brands by name

Popular brands