Toyota Verso TNS510 User Manual Download

Page: 101 / 258

TNS 510

101

ADVANCED FUNCTIONS

Setup

Setting the items shown on the “Setup”

screen can be done.

1. Push the “MENU” button.

2. Touch “Navigation”.

3. Touch “Setup”.

4. Touch the items to be set.
5. Touch “OK” on the screen.

The previous screen will be displayed.

INFORMATION

To reset all setup items, touch

“Default”.

● Distance unit

Distance unit can be changed.

1. Push the “MENU” button.

2. Touch “Navigation” on the “Menu”

screen.

3. Touch “Setup” on the “Navigation”

screen.

4. Touch “km” or “miles” of “Distance”

to choose the distance unit.

The selected button is highlighted.

5. Touch “OK”.

INFORMATION

This function is available only in

English. To switch language, see

“Selecting a language” on page 179.

4E5134G

4E5135G

01955_TNS 510_OM.indd 101

21/10/2008 16:17:40

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands