Toyota Verso TNS510 User Manual Download

Page: 25 / 258

TNS 510

BASIC FUNCTION

● To input numbers and symbols

To display the number keys and symbol

keys, touch

“0-9”

Enter numbers and symbols by touching

the number keys and symbol keys directly.



: Touching this button erases one

letter. By holding this button, letters

will continue to be erased.

> 1/2

: Touching this button displays

other symbols.

< 2/2

● To display the list

To search for an address or a name, touch

“List”

. Matching items from the database

are listed even if the entered address or

name is incomplete.

If the number of matches is four or less, the

list is displayed without touching

“List”

INFORMATION

The number of matching items is

shown to the right side of the screen.

If the number of matching items is

more than 9,999, the system displays

“

****

” on the screen.

1E5009G

01955_TNS 510_OM.indd 25

21/10/2008 16:16:38

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands