Toyota Verso TNS510 User Manual Download Page 85

Page: 85 / 258

TNS 510

ADVANCED FUNCTIONS

Volume

The voice guidance volume can be

adjusted or switched off.

1. Push the “MENU” button.

2. Touch “Navigation”.

3. Touch “Volume”.

To adjust the volume, select the desired

level by touching the appropriate number.

If voice guidance is not needed, touch

“Off”

to disable the feature.

When selected the number or

“Off”

will be

highlighted.

4. Touch “OK” to confirm your

selection.

INFORMATION

During route guidance, the voice

guidance continues even if the

navigation screen is changed to other

screens.

“Adaptive volume control”:

By turning

“Adaptive volume control” on, the volume

is turned up automatically when the vehicle

speed exceeds 80 km/h (50 mph).
To turn the “Adaptive volume control”

system on, touch the button. The indicator

will be highlighted.

4E5005G

01955_TNS 510_OM.indd 85

21/10/2008 16:17:25

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Brands by name

Popular brands