Toyota Verso TNS510 Page 97 User Manual Download

Page: 97 / 258

TNS 510

ADVANCED FUNCTIONS

6. Touch the eight directional touch-

screen button to move the cursor

to the desired point on the map.

7. Touch “Enter”.

8. Touch either

to change

the size of the area to be avoided.

9. Touch “OK”.

INFORMATION

● If a destination is input in the area

to avoid or the route calculation

cannot be made without running

through the area to avoid, a route

passing through the area to be

avoided may be shown.

● Up to 10 locations can be registered

as points/areas to avoid. If there

are 10 locations already registered,

the following message will be

displayed: “Unable to register

additional points. Perform the

operation again after deleting

unnecessary points.”.

— Editing area to avoid

The name, location and/or area size of a

registered area can be edited.

1. Push the “MENU” button.

2. Touch “Navigation” on the “Menu”

screen.

3. Touch “Memory” on the “Navigation”

screen.

4. Touch “Edit”.

5. Touch the desired area button.

4E5038G

4E5039G

4E5040aG

4E5041G

01955_TNS 510_OM.indd 97

21/10/2008 16:17:37

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands