Toyota Verso TNS510 Page 139 User Manual Download

Page: 139 / 258

TNS 510

139

OTHER FUNCTIONS

● By received calls
You can call by received calls. When a

call is received, the system memorizes

up to 5 numbers. If it is more than 5, the

oldest number is deleted.

1. Touch “Call log” to display the

“Dialled numbers” screen.

2. Touch “Received calls” to display

the “Received calls” screen.

● When a telephone number registered

in the phonebook is received, the name

and the number are displayed.

● Received calls which you did not answer

are also memorized in the system and

“Abs.”

is displayed on the left side of

the number.

● Unnoticed telephone number such as

a public telephone is not memorized in

the system.

3. Select the desired number from the

list.

Touch

or push

of the steering

wheel.
● A international phone call may not be

made depending on the cellular phone

which you have.

5E5330G

5E5331G

5E5332G

5E5333G

01955_TNS 510_OM.indd 139

30/10/2008 15:27:32

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands