Toyota Verso TNS510 User Manual Download

Page: 78 / 258

TNS 510

ROUTE GUIDANCE

Select the desired POI categories from

the list.

The selected category icon appears on the

top left of the screen.

By selecting the desired POI category and

then touching

“OK”

, the selected POI

icons are displayed on the map screen.

To return to the POI category selection

screen, touch

“More”

● To display the local POI list

Points of Interest that are within 30 km

(20 miles) of the current position will be

listed from among the selected categories.

1. Touch “List nearest POI's” on the

“Display POI icons” screen.

2. Touch the button of the desired Point

of Interest.

The selected Points of Interest are

displayed on the map screen.

“On route”:

When the indicator is

illuminated by touching this button, the list

of the items searched along the route is

displayed.

3E5040G

3E5028G

3E5029G

01955_TNS 510_OM.indd 78

21/10/2008 16:17:20

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands