Toyota Verso TNS510 User Manual Download

Page: 218 / 258

218

TNS 510

AUDIO SYSTEM

When the connection is complete, this

screen is displayed. Now you can use the

Bluetooth

portable player.

From portable player

When making a connection from the

portable player, operate the portable player

controls to connect.

To make a connection from the portable

player, first display this “Connect Bluetooth*

audio” screen.

*: Bluetooth is a registered trademark of

Bluetooth SIG. Inc.

INFORMATION

Auto Bluetooth

connect may not be

available for certain portable players,

which must be connected manually.

● Reconnecting the Bluetooth

audio

player

Vehicles with smart entry and start

system—

If the Bluetooth

audio system is

disconnected with a poor reception

from the Bluetooth

network when the

“ENGINE STARTSTOP” switch is in the

ACCESSORY or IGNITION ON mode, the

system automatically reconnects the

Bluetooth

audio player. In this case,

the connection result is not displayed.

Vehicles without smart entry and start

system—

If the Bluetooth

audio system is

disconnected with a poor reception

from the Bluetooth

network when

the engine switch is in the ACC or ON

position, the system automatically

reconnects the Bluetooth

audio player.

In this case, the connection result is not

displayed.

If the Bluetooth

is disconnected on

purpose, such as when you turn off your

portable player, this does not happen.

Reconnect it by the following methods.

● Select the portable player again.
● Enter the portable player.

E6114GS

01955_TNS 510_OM.indd 218

21/10/2008 16:19:02

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands