Toyota Verso TNS510 Page 121 User Manual Download

Page: 121 / 258

TNS 510

121

OTHER FUNCTIONS

INFORMATION ITEMS
“ENGINE OIL”:

Replace engine oil

“OIL FILTER”:

Replace engine oil filter

“ROTATION”:

Rotate tyres

“TYRE”:

Replace tyres

“BATTERY”:

Replace battery

“BRAKE PAD”:

Replace brake linings

“WIPER”:

Replace wiper blades

“LLC”:

Replace engine coolant

“BRAKE OIL”:

Replace brake fluid

“ATF”:

Replace ATF (Automatic Trans-

mission Fluid)

“SERVICE”:

Scheduled maintenance

“AIR FILTER”:

Replace air filter

“PERSONAL”:

New information items can

be created separately from provided ones.

5. Input the conditions.
Notice of “Date”:

The next maintenance

date can be input.

Notice of “Distance”:

The driving distance

until the next maintenance check can be

input.

“Delete”:

To cancel the date and distance

conditions.

“Reset”:

To reset the date and distance

conditions.

6. Touch “OK”.

The screen then returns to the

“Maintenance” screen.

INFORMATION

● For

scheduled

maintenance

information, please refer to the

“Toyota Service Booklet” or

“Toyota Warranty Booklet”.

● Depending on driving or road

conditions, the actual date and

distance may differ from the stored

date and distance in the system.

5E5102G

01955_TNS 510_OM.indd 121

21/10/2008 16:17:54

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands