Toyota Verso TNS510 User Manual Download

Page: 81 / 258

TNS 510

ROUTE GUIDANCE

To indicate the next destination.

To preview the route to the next

destination.

To preview the route to the next

destination in fast-forward mode.

To stop the preview.

To review the route to the previous

destination or starting point.

To review the route to the previous

destination or starting point in fast-

forward mode.

To indicate the previous destination

or starting point.

— Route trace

It is possible to store the traveled route up

to 200 km (124 miles) and retrace the route

on the display.

INFORMATION

This feature is available on the map

with more detailed map scale than

50 km (30 miles).

Touch “Map view”.

3E5024G

01955_TNS 510_OM.indd 81

21/10/2008 16:17:23

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands