Toyota Verso TNS510 Page 94 User Manual Download

Page: 94 / 258

TNS 510

ADVANCED FUNCTIONS

● To change “Phone no.” (telephone

number)

1. Touch “Phone no.” on the “Memory

points” screen.

2. Enter the number using numeral

keys.

3. Touch “OK”.

The previous screen will be displayed.

— Deleting memory points

1. Push the “MENU” button.

2. Touch “Navigation” on the “Menu”

screen.

3. Touch “Memory” on the “Navigation”

screen.

4. Touch “Delete”.

5. Touch the button to be deleted.
“Del. all”:

To delete all memory points in

the system.

6. To delete the memory point, touch

“Yes”. To cancel the deletion, touch

“No”.

4E5029aG

4E5030aG

4E5031G

01955_TNS 510_OM.indd 94

21/10/2008 16:17:34

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands