Toyota Verso TNS510 User Manual Download

Page: 84 / 258

TNS 510

ADVANCED FUNCTIONS

Suspending and resuming

guidance

● To resume guidance
1. Push the “MENU” button.

2. Touch “Navigation”.

3. Touch “Suspend guidance”.

INFORMATION

Without route guidance, the “Suspend

guidance” cannot be used.

The screen will change to the current

position map with route guidance.

●  To resume guidance
1.  Push the “MENU” button.
2.  Touch  “Navigation”  on  the  “Menu”

screen.

3. Touch “Resume guidance”.

The screen will change to the current

position map with route guidance.

4E5002G

4E5004G

01955_TNS 510_OM.indd 84

24/10/2008 11:18:22

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands