Toyota Verso TNS510 User Manual Download

Page: 106 / 258

106

TNS 510

ADVANCED FUNCTIONS
● Traffic notification

When the “Traffic notification” feature is

turned on, the system notifies you of traffic

or seasonal restrictions.

To turn the “Traffic notification” mode on:

1. Push the “MENU” button.

2. Touch “Navigation” on the “Menu”

screen.

3. Touch “Setup” on the “Navigation”

screen.

Then touch



to display page 2 of the

“Setup” screen.

4. Touch “On” of “Traffic notification”.

The selected button is highlighted.

5. Touch “OK”.

● Time zone

Time zone can be changed.

1. Push the “MENU” button.

2. Touch “Navigation” on the “Menu”

screen.

3. Touch “Setup” on the “Navigation”

screen.

Then touch



to display page 2 of the

“Setup” screen.

4. Touch “Change” of “Time zone”.

The “Change time zone” screen will be

displayed on the display.

5. Touch the desired time zone.

The selected button is highlighted.

“Others”:

You can adjust time zone

manually.

4E5142G

4E5138G

4E5143G

01955_TNS 510_OM.indd 106

21/10/2008 16:17:44

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands