Toyota Verso TNS510 Page 80 User Manual Download

Page: 80 / 258

TNS 510

ROUTE GUIDANCE

You can scroll through the list of roads by

touching





. However, not all road

names in the route may appear on the list.

If a road changes its name without requiring

a turn (such as on a street that runs through

two or more towns), the name change will

not appear on the list. The street names

will be displayed in order from the starting

point, along with the distance to the next

turn.

These marks indicate the direction

in which you should turn at an

intersection.

Touch “Map” of the “Turn list” screen.

The point which you choose is displayed

on the map screen.

— Route preview

1. Touch “Map view”.

2. Touch “Route preview”.

3E5033G

3E5034G

3E5024G

3E5035G

3E5036G

01955_TNS 510_OM.indd 80

21/10/2008 16:17:23

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands