Toyota Verso TNS510 Page 53 User Manual Download

Page: 53 / 258

TNS 510

DESTINATION SEARCH

INPUTTING THE TOWN CENTRE

1. Touch “Input town centre”.

2. Input the town centre name.

3. Touch the button of the desired city

centre name.

When an arrow facing the desired point is

touched, the map scrolls in that direction.

Releasing the finger from the arrow will

stop the scrolling.

4. Touch “Enter”.

The search point is set and the “POI near

cursor” screen will be displayed.

SETTING THE CURRENT POSITION AS

THE SEARCH POINT

Touch “Current position”.

The search point is set at the current

position, and the “POI near cursor” screen

is displayed.

SETTING THE SEARCH POINT VIA THE

MAP SCREEN

1. Touch “Map”.

When an arrow facing the desired point is

touched, the map scrolls in that direction.

Releasing the finger from the arrow will

stop the scrolling.

2. Touch “Enter”.

The search point is set and the “POI near

cursor” screen will be displayed.

2E5036G

2E5039G

2E5037G

2E5038G

01955_TNS 510_OM.indd 53

21/10/2008 16:17:01

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands