Toyota Verso TNS510 User Manual Download

Page: 240 / 258

240

TNS 510

AUDIO SYSTEM

● The play order of the compact disc, SD

memory card and USB memory device

with the structure shown on the left is as

follows:

001.mp3

002.wma...

006.mp3

CDR and CDRW discs

● CD-R/CD-RW discs that have not been

subject to the “finalizing process” (a

process that allows discs to be played

on a conventional CD player) cannot be

played.

● It may not be possible to play CD-R/

CD-RW discs recorded on a music CD

recorder or a personal computer because

of disc characteristics, scratches or dirt

on the disc, or dirt, condensation, etc.

on the lens of the unit.

● It may not be possible to play discs

recorded on a personal computer

depending on the application settings

and the environment. Record with the

correct format. (For details, contact the

appropriate application manufacturers

of the applications.)

● CD-R/CD-RW discs may be damaged

by direct exposure to sunlight,

high temperatures or other storage

conditions. The unit may be unable to

play some damaged discs.

● If you insert a CD-RW disc into the MP3/

WMA player, playback will begin more

slowly than with a conventional CD or

CD-R disc.

● Recordings on CD-R/CD-RW cannot be

played using the DDCD (Double Density

CD) system.

001.mp3

Folder 1

Folder 2

002.wma

003.mp3

004.mp3

Folder 3

005.wma

006.mp3

6E5063a

01955_TNS 510_OM.indd 240

21/10/2008 16:19:12

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands