Toyota Verso TNS510 User Manual Download Page 128

Page: 128 / 258

128

TNS 510

OTHER FUNCTIONS

6. To delete and/or edit the memo,

touch the desired memo button.

“Del. all”:

To delete all the displayed

memos.

A message will be displayed.

7. To delete, touch “Yes”. To cancel the

deletion, touch “No”.

● To display memos for a specified

period of time

1. Touch “Period” on the “Search List”

screen.

2. Enter the period using the numeral

keys.

The period from January 1, 2008 through

December 31, 2027 can be set for

searching.

3. After setting the period, touch “OK”.

The “Memo list” screen will be displayed.

5E5116G

5E5117G

01955_TNS 510_OM.indd 128

21/10/2008 16:17:59

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Brands by name

Popular brands