Toyota Verso TNS510 Page 187 User Manual Download

Page: 187 / 258

TNS 510

187

AUDIO SYSTEM

3. Touch the desired button.

“TREB” “+” or “–”:

Adjusts high-pitched

tones.

“MID” “+” or “–”:

Adjusts mid-pitched

tones.

“BASS” “+” or “–”:

Adjusts low-pitched

tones.

“FRONT” or “REAR”:

Adjusts sound

balance between the front and rear

speakers.

“L” or “R”:

Adjusts sound balance

between the left and right speakers.

4. Touch “OK”.

The tone of each mode (for such as AM,

FM and CD player) can be adjusted.

● DSP control

You can change the automatic sound

levelizer and the equalizer system.

1. Push the “AUDIO” button.

2. Touch “DSP”.

Automatic sound levelizer (ASL):

When the audio sound becomes difficult

to hear due to road noise, wind noise or

other noises while driving, touch

“HIGH”

“MID”

“LOW”

. The system adjusts

to the optimum volume and tone quality

according to the noise level.

When the system is on, the sound

adjustment level is displayed on the

screen.
To turn off the system, touch the

“OFF”

switch.

Equalizer system (EQ):

The equalizer system consists of three

different preset equalizer modes. You

can select from

“COMPACT”

“SUV”

“SEDAN”

depending on your vehicle body

type.
To turn off the system, touch the

“OFF”

switch.

6E5112G

6E5113G

01955_TNS 510_OM.indd 187

21/10/2008 16:18:48

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands