Toyota Verso TNS510 Page 209 User Manual Download

Page: 209 / 258

TNS 510

209

AUDIO SYSTEM

● Searching for a desired file

While the disc is playing, touch “SCAN”

briefly.

“SCAN” appears on the screen. The SD/

USB player will play the next file in the

folder for 10 seconds, then scan again.

To select a file, touch

“SCAN”

once again.

If the SD/USB player reaches the end of

the folder, it will continue scanning from

file 1.
After all the files are scanned in one pass,

normal play resumes.

● Searching for a desired folder

While the disc is playing, touch “SCAN”

and hold it until the “FLD.SCAN”

appears on the screen.

The program at the beginning of each

folder will be played for 10 seconds. To

continue listening to the program of your

choice, touch

“SCAN”

once again.

After all the folders are scanned in one

pass, normal play resumes.

01955_TNS 510_OM.indd 209

21/10/2008 16:18:58

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands