Toyota Verso TNS510 User Manual Download

Page: 207 / 258

TNS 510

207

AUDIO SYSTEM

● Selecting a desired folder
“FOLDER▲”:

Touch this button to go to

the next folder.

“FOLDER▼”:

Touch this button to go to

the previous folder.

“FOLDER LIST”:

The desired folder can

be selected in a list.
Touch

“FOLDER LIST”

. The folder list is

displayed.

Touch the desired folder number. The

changer will start playing the first file of the

selected folder.



By touching this button, the list moves

up by 6 folder groups. If this button is

touched when the top page of the list is

displayed, the last page is displayed.



By touching this button, the list moves

down by 6 folder groups. If this button is

touched when the last page of the list is

displayed, the top page is displayed.

“FILE”:

The file list is displayed.

“DETAIL”:

Details of the file currently

playing is displayed.

● Selecting a desired file

“

TRACK” or

“TRACK

”

button:

Use for direct access to a desired file.

Push the

“

TRACK”

“TRACK

”

button and repeat until the desired file

number appears on the display. As you

release the button, the SD/USB player

will start playing the selected file from the

beginning. When “RAND” or “FLD·RPT” is

on, the file number within the folder you are

currently listening to appears.

Fast forward:

Push the

“

TRACK”

button and hold it to fast forward the SD

memory card/USB memory device. When

you release the button, the SD/USB player

will resume playing from that position.

Reverse:

Push the

“TRACK

”

button

and hold it to reverse the SD memory card/

USB memory device. When you release

the button, the SD/USB player will resume

playing.

01955_TNS 510_OM.indd 207

21/10/2008 16:18:57

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands