Toyota Verso TNS510 User Manual Download

Page: 39 / 258

TNS 510

BASIC FUNCTION

5. Touch “Address”.

6. Select the town name.

To select town name, see “— Destination

search by “Address”” on page 45.

7. Enter the street name.

Every touch on a letter key narrows the

selection.

Letters that cannot be selected in the

database are dimmed out.

When there are four or fewer database

items, these items are displayed in a list.

Even if the entered name is incomplete,

touching

“List”

displays the list.

8. Select the street name from the

displayed list.

9. Enter the house number.

10. Touch “Enter”.

Registration of home is complete and the

“Memory points” screen is displayed.

1E5060G

1E5050G

1E5051aG

01955_TNS 510_OM.indd 39

21/10/2008 16:16:51

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands