Toyota Verso TNS510 Page 188 User Manual Download

Page: 188 / 258

188

TNS 510

AUDIO SYSTEM

● Your CD player

When you insert a disc, insert it with the

label side up. The CD player will play from

track 1 through to the end of the disc. Then

it will play from track 1 again.

NOTICE

Never try to disassemble or oil any

part of the CD player. Do not insert

anything other than discs into the

slot.

The player is intended for use with 12 cm

(4,7 in.) discs only.

● Digital audio broadcast system

If an optional digital audio broadcast system

is installed, DAB can be used. Push the

“MODE”

button and then touch

“DAB”

select DAB mode. For details, refer to the

DAB tuner owner's manual.

● CD changer

If an optional CD changer is installed, CDs

can be played continuously with no need of

changing CDs. Push the

“MODE”

button

and then touch

“CDCH”

to select CDCH

mode. For details, refer to the CD changer

owner's manual.

● iPod connecting cable

If an optional iPod connecting cable

is installed, an iPod can be used by

connecting the cable. For details, see

page 229.

— Radio operation

● Listening to the radio
1. Push the “MODE” button.

2. Touch these buttons to choose either

an AM or FM station.

“MW” or “FM” appears on the screen.
If your vehicle is equipped with a digital

audio broadcast system, when you push

the “MODE” button and touch

“DAB”

“DAB” station appears on the display.

01955_TNS 510_OM.indd 188

21/10/2008 16:18:48

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands