Toyota Verso TNS510 User Manual Download

Page: 31 / 258

TNS 510

BASIC FUNCTION

POI INFORMATION

When the cursor is set on a POI icon, the

name and

“Info.”

are displayed on the top

of the screen.

Touch “Info.”.

Information such as the name, address,

position and phone number are displayed.

“Enter



”

is touched, the position of the

cursor is set as a destination.

If there is already a set destination,

“Add



”

and

“Replace



”

are displayed.

“Add to



”

: To add a destination.

“Replace



”

: To delete the existing

destinations and set a new one.

To register this POI as a memory point,

touch

“Mark”

. (See “ — Registering

memory points” on page 89.)

is touched, the registered telephone

number can be called.

INFORMATION

The desired Point of Interest can be

displayed on the map screen. (See

“— Display POI icons” on page 76.)

1E5021G

1E5022G

01955_TNS 510_OM.indd 31

21/10/2008 16:16:43

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands