Toyota Verso TNS510 User Manual Download Page 220

Page: 220 / 258

220

TNS 510

AUDIO SYSTEM
● Selecting a desired track

“

TRACK” or “TRACK

” button:

Use for direct access to a desired audio

track.

Push the

“

TRACK”

“TRACK

”

button and repeat until the desired track

number appears on the screen. As you

release the button, the player will start

playing the selected track from the

beginning.

Fast forward:

Push and hold the

“

TRACK”

button to

fast forward the player. When you release

the button, the player will resume playing

from that position.

Reverse:

Push and hold the

“TRACK

”

button to

reverse the player. When you release the

button, the player will resume playing.

● Selecting a desired album

“ALBUM▲”: Touch this button to select

the next album.
“ALBUM▼”: Touch this button to select

the previous album.

E6102GS

01955_TNS 510_OM.indd 220

21/10/2008 16:19:03

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Brands by name

Popular brands