Toyota Verso TNS510 User Manual Download

Page: 113 / 258

TNS 510

113

ADVANCED FUNCTIONS

RDS-TMC icon

Icons are displayed on the map. To display

information, touch the corresponding icon

on the screen.

RDS-TMC information arrow

Using TMC information, the system

displays arrows along a route. The colour of

the arrow indicates specific road condition

information.

“Red”

indicates stationary traffic flow.

“Orange”

indicates traffic jam.

“Blue”

indicates closed road, accident

and so on.

RDS-TMC indicator

The indicator comes on when TMC

information is received.

When regulatory information is received,

the indicator becomes a touch button.

: Receiving
: Receiving regulatory information

: Receive regulatory information

pertaining to the route (touch

switch)

(b) Auto avoid traffic

Using RDS-TMC information, the system

automatically calculates a new route.

When the system calculates a new route,

a confirmation to accept the new route is

displayed on the screen.

If you touch

“Yes”

, the system changes

the guidance route to the new route. Touch

“No”

to keep the previous screen.

1. Push the “MENU” button to display

the “Menu” screen and touch “RDS-

TMC”.

2. Touch “Auto avoid traffic”.

4E5082G

01955_TNS 510_OM.indd 113

21/10/2008 16:17:49

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands