Toyota Verso TNS510 User Manual Download

Page: 199 / 258

TNS 510

199

AUDIO SYSTEM

“FILE”:

The desired file can be selected

in a list.
Touch

“FILE”

. The file list is displayed.

Touch the desired file number. The CD

player will start playing the selected file

from the beginning.



By touching this button, the list moves

up by 6 file groups. If this button is touched

when the top page of the list is displayed,

the last page is displayed.



By touching this button, the list moves

down by 6 file groups. If this button is

touched when the last page of the list is

displayed, the top page is displayed.

“FOLDER”:

The folder list is displayed.

“DETAIL”:

Details of the file currently

playing is displayed.

6E5120G

6E5121G

01955_TNS 510_OM.indd 199

21/10/2008 16:18:53

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands