Toyota Verso TNS510 User Manual Download

Page: 26 / 258

TNS 510

BASIC FUNCTION

● List screen operation

When a list is displayed, use the appropriate

button to scroll through the list.



To shift to the next or previous

page.





To scroll up or down one item at a

time.

This expresses a displayed screen

position.





appears to the right of the

item name, the complete name is

too long for the display. Touch



to scroll to the next section of the

name.
Touch



to move to the beginning

of the name.

● Sorting

The order of a list displayed on the screen

can be rearranged.

TYPE A

1. Touch “Sort by”.

2. Select the desired sorting criteria.

Sorting criteria are as follows:

“Distance”

: To sort in the order of distance

from your current location.

“Date”

: To sort in the order of the date.

“Category”

: To sort in the order of the

category.

“Icon”

: To sort in the order of the icons.

“Name”

: To sort in the order by name.

“Attribute”

: To sort in the order by

attribute.

1E5011G

1E5012G

01955_TNS 510_OM.indd 26

21/10/2008 16:16:39

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands