Toyota Verso TNS510 Page 227 User Manual Download

Page: 227 / 258

TNS 510

227

AUDIO SYSTEM

(a) Connecting (disconnecting) portable

audio devices

Ensure that the portable audio

device power is turned OFF.

Ensure that the audio mode is set to a

mode other than AUX, or that the audio

system power is turned OFF.

Connect (or disconnect) the AUX port.

NOTICE

● Avoid getting hands caught in the

AUX port.

● Do not connect, operate, or

disconnect the portable audio

device while driving.

● Store portable audio devices away

from direct sunlight when not in

use.

INFORMATION

● Disconnecting or connecting the

portable audio device while in AUX

mode may lead to distortion and

speaker damage. Always ensure

to turn off the audio system power

or switch to another mode prior to

disconnecting or connecting.

● Changing the portable audio device

power supply while in AUX mode

may lead to distortion and speaker

damage. Always ensure to turn off

the audio system power or switch

to another mode prior to changing

the portable audio device power

supply.

● Please note that the volume level

will vary due to differing output

levels depending on the connected

device.

● If the volume is adjusted while in

AUX mode, the volume can be

stored as the volume level for

AUX mode. This stored volume

level will be returned to its default

setting if the portable audio device

is disconnected.

● When using a portable audio device

connected to the power outlet or

cigarette lighter, noise may occur

during playback.

If this happens, use the power

source (battery) of the portable

audio device.

01955_TNS 510_OM.indd 227

21/10/2008 16:19:07

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands