Toyota Verso TNS510 Page 93 User Manual Download

Page: 93 / 258

TNS 510

ADVANCED FUNCTIONS

● To change “Name”

1. Touch “Name” on the “Memory

points” screen.

2. Enter the name using the alpha

numeric keys.

Up to 24 letters can be entered.

3. Touch “OK”.

The previous screen will be displayed.

DISPLAYING MEMORY POINT NAMES

The name of a memory point that may be

displayed on the map can be set.

To show the name, touch “On” on the

“Memory points” screen. To not show

it, touch “Off”.

● To change “Location”
1. Touch “Location” on the “Memory

points” screen.

2. Touch the eight directional touch-

screen button to move the cursor

to the desired point on the map.

3. Touch “Enter”.

The previous screen will be displayed.

4E5026G

4E5027aG

4E5028G

01955_TNS 510_OM.indd 93

21/10/2008 16:17:33

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands