TNS 510
191
AUDIO SYSTEM
6
When receiving FM:
Push
“MODE”
button and touch “TA”
button to switch the radio mode to TP
(Traffic Program). “TP” will appear on the
screen. If the TP station is not received,
the “TP” will start flashing.
In the TP mode, the radio will begin seeking
a TP station. If the radio seek out a TP
station, the program name will appear on
the screen. If the TA station is received,
the radio will be switched to the traffic
information program automatically. When
the program ends, the initial operation
resumes. When also in AF mode, the radio
will seek a TP station by using the AF list.
Push
“MODE”
button and touch “TA”
button once again to switch the radio
mode to TA. “TA” will appear on the screen
and the radio will mute the volume of FM
station.
In the TA mode, the radio will begin seeking
a TP station. It sounds only when a TA
station is received. When a TP station is
received, the program service name will
appear on the screen. When also in AF
mode, the radio will seeking a TP station
by using the AF list.
While the radio is seeking any TP station,
“TP SEEK” appears on the screen. If the
radio cannot seek out any TP stations,
“NOTHING” will appear on the screen for
2 seconds and start searching a TP station
again.
If the TP signal is halted for 20 seconds
after the TP mode was set, the radio will
seek another TP station automatically.
EON (Enhanced Other Network) system
— If the RDS station (with EON data)
you are listening to is not broadcasting
a traffic information program in the TA
(Traffic Announcement) mode, the radio
will be switched to the traffic information
program automatically by using the EON
AF list. After the traffic information ends,
the radio will return to the initial program
automatically. One beep will sound to
tell you when this feature starts and ends
operation.
When listening to a disc:
With the “TA” button touched in the “CD”
mode, a station broadcasting traffic
information is sought and “TA” appears on
the screen.
When the traffic information program
starts, the “CD” mode is interrupted and
the traffic information is automatically
broadcasted. When the program ends, the
initial operation resumes.
“TA VOL” (Traffic Announcement Volume)
function:
The volume level when receiving
the traffic announcement is memorized.
When “TA” is received next time, the
system compares the volume before “TA”
is received and the memorized TA volume
and automatically selects the louder
volume. However, the range of volume
memory is limited: if the volume received
previously is less than the minimum, this
volume will be used.
01955_TNS 510_OM.indd 191
21/10/2008 16:18:49
