Toyota Verso TNS510 User Manual Download

Page: 182 / 258

182

TNS 510

AUDIO SYSTEM

Quick reference

SD memory card slot

Insert an SD memory card for the SD

player into this slot. For details, see

page 203.

“

” button

Push this button to eject a disc. For

details, see page 193.

“

TRACK” or “TRACK

” button

Push the

“

TRACK”

or the

“TRACK

”

button to move up or

down the frequency, track or file.

Push and hold the

“

TRACK”

the

“TRACK

”

button to seek up or

down for a station.

For details, see pages 189, 195, 198,

207, 220 and 233.

“+ VOL” or “VOL –” button

Push

“+ VOL”

“VOL ”

button to

adjust the volume. For details, see

page 184.

“PWR” button

Push this button to turn the audio

system on and off. For details, see

page 184.

USB port

Plug a USB memory device for the

USB player into this port. For details,

see page 204.

AUX port

Plug a portable audio device into this

port to play in AUX mode. For details,

see page 227.

01955_TNS 510_OM.indd 182

21/10/2008 16:18:44

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands