Toyota Verso TNS510 Page 237 User Manual Download

Page: 237 / 258

TNS 510

237

AUDIO SYSTEM

Audio remote controls —

— Steering switches

Some parts of the audio system can be

adjusted with the switches on the steering

wheel.
Depending on the model or grade, steering

wheel switches may not be available.

Details of the specific switches, controls,

and features are described below.

Volume control switches

“

” “

” switches

“MODE” switch

Volume control switch

Push

“+”

side to increase the volume. The

volume continues to increase while the

switch is being pressed.
Push

“-”

side to decrease the volume.

The volume continues to decrease while

the switch is being pressed.

“

” “

” switches

Radio

To select a preset station:

Quickly push and release the

“

”

“

”

switch. Do this again to select the

next preset station.

To seek a station:

Push and hold the

“

”

“

”

switch

until you hear a beep. Do this again to

find the next station. If you push either the

“

”

“

”

switch in seek mode, the

seek mode will cancel.

CD player, Bluetooth

audio and SD/

USB player

Use this button to skip up or down to a

different track or file in either direction.
To select a desired track or file:

Quickly push and release the

“

”

“

”

switch until the track or file you want

to play is set. If you want to return to the

beginning of the current track or file, push

the

“

”

switch once, quickly.

MP3/WMA disc, SD memory card and

USB memory device—

To select a desired folder:

Push and hold the

“

”

“

”

side of the

switch until you hear a beep. Repeat this

until the folder you want to listen to is set.

“MODE” switch

Each time you push the

“MODE”

switch,

the system changed the audio mode.
To turn the audio system on, push the

“MODE”

switch.

To turn the audio system off, push and hold

the

“MODE”

switch until you hear a beep.

E6101S

01955_TNS 510_OM.indd 237

21/10/2008 16:19:11

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands