Toyota Verso TNS510 User Manual Download

Page: 136 / 258

136

TNS 510

OTHER FUNCTIONS

● Reconnecting the Bluetooth

phone

Vehicles with smart entry and start

system—

If the Bluetooth

phone is disconnected

with a poor reception from the

Bluetooth

network when the “ENGINE

START STOP” switch is in the

ACCESSORY or IGNITION ON mode,

the system automatically reconnects

the Bluetooth

phone. In this case, the

connection result is not displayed.

If the Bluetooth

is disconnected on purpose

such as you turned your cellular phone off,

this does not happen. Reconnect it by the

following methods.

●

Select the Bluetooth

phone again.

● Enter the Bluetooth

phone.

Vehicles without smart entry and start

system—

If the Bluetooth

phone is disconnected

with a poor reception from the

Bluetooth

network when the engine

switch is in ACC or ON position, the

system automatically reconnects the

Bluetooth

phone. In this case, the

connection result is not displayed.

If the Bluetooth

is disconnected on purpose

such as you turned your cellular phone off,

this does not happen. Reconnect it by the

following methods.

● Select the Bluetooth

phone again.

● Enter the Bluetooth

phone.

— Call on the Bluetooth

phone

After you enter the Bluetooth

phone,

you can call by using hands-free system.

You can call using the 6 methods

described below.

● By dial

You can call by inputting the telephone

number.

Touch the desired key to input the

telephone number.

Each time you touch ◄, an inputted digit

is deleted.

When you touch

, the number you

called last is inputted.
Touch

or push

of the steering

wheel.

5E5323G

01955_TNS 510_OM.indd 136

21/10/2008 16:18:03

Summary of Contents for Verso TNS510



































































































































































































































































Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands

Toyota Verso TNS510, User Manual

Search results

Summary of Contents for Verso TNS510

Reviews:

Related manuals for Verso TNS510

Brands by name

Popular brands